U9: using waste to manufacture finished goods
U9 exemption allows you to use waste in place of raw materials to manufacture a finished product.
Applies to England
There’s a charge for most waste exemptions
This exemption is in band 1. Read waste exemption charges to find out what the charges and charging bands are.
Types of activity you can carry out
These include using:
- boiler ash to manufacture breeze blocks
- waste textiles to manufacture carpet underlay
Types of activity you cannot carry out
You cannot use this exemption if your operation involves any activity described in part A (1) or part A (2) of part 2 of Schedule 1 of the Environmental Permitting (England and Wales) Regulations 2010 (as amended).
These are industrial scale processes which need an installations permit.
Other things you need to know
For the purposes of this exemption, ‘finished goods’ means goods that are ready for use by an end consumer without any further processing. Waste derived finished goods still need to meet the end of waste test.
A manufacturing process should result in a product that is significantly different from the raw materials that it was made from.
Wood chip is not considered to be finished goods.
Types and quantities of waste you can use
The waste codes are listed in the List of Wastes (LoW) Regulations. You need to make sure your waste fits within the waste code and the description.
Waste code | Type of waste | Quantity (tonnes) at any one time |
---|---|---|
10Ìý01Ìý01 10Ìý01Ìý02 |
Ash only | 500 |
10Ìý12Ìý08 | Ceramics | 100 |
10Ìý11Ìý12 15Ìý01Ìý07 19Ìý12Ìý05 20Ìý01Ìý02 |
Glass | 5,000 |
10Ìý01Ìý05 | Gypsum only | 500 |
20Ìý01Ìý99 | Lion faeces only | 5 |
12Ìý01Ìý01 12Ìý01Ìý03 15Ìý01Ìý04 16Ìý01Ìý17 16Ìý01Ìý18 19Ìý10Ìý01 19Ìý10Ìý02 19Ìý12Ìý02 19Ìý12Ìý03 20Ìý01Ìý40 |
Metals | 500 |
15Ìý01Ìý01 19Ìý12Ìý01 20Ìý01Ìý01 |
Paper and cardboard | 15,000 |
07Ìý02Ìý13 12Ìý01Ìý05 15Ìý01Ìý02 19Ìý12Ìý04 20Ìý01Ìý39 |
Plastics | 500 |
19Ìý12Ìý04 | Rubber only | 30 |
04Ìý02Ìý21 04Ìý02Ìý22 15Ìý01Ìý09 19Ìý12Ìý08 20Ìý01Ìý10 20Ìý01Ìý11 |
Textiles | 1,000 |
03Ìý01Ìý05 03Ìý03Ìý01 15Ìý01Ìý03 19Ìý12Ìý07 20Ìý01Ìý38 |
Wood, bark, cork, sawdust, shavings, cuttings, particle board | 100 |
The waste must be stored in a secure location at the place where the manufacturing is carried out.
Ash, ceramics, glass, gypsum, metals must be stored at a secure location with sealed drainage.
Lion faeces, textiles, wood and bark must be stored indoors or in a secure container.
Paper and cardboard must be stored in bales, in a container or indoors.
For paper and cardboard, up to 1,000 tonnes can be stored outdoors in an enclosure designed and maintained to prevent escape of litter.
Heat treatment is not permitted for plastics and rubber.
Within the 30 tonnes limit for rubber, you must store it in piles no bigger than 10 tonnes, with a gap as a fire break between each pile.
You should not use any more waste than you need to or this will be considered as waste disposal and will not be exempt.
U9 related exemptions
T1: cleaning, washing, spraying or coating relevant waste
T4: preparatory treatments such as baling, sorting, shredding
If you want to use waste without treatment for a specified purpose you could register U8: using waste for a specified purpose.
If you want to use more waste than is allowed or a type of waste which is not allowed, you will need an environmental permit.
Register a U9 exemption
You need to register this exemption with the Environment Agency if you meet the requirements.
Updates to this page
-
Updated with a link to new information about charges and charging bands for waste exemptions.
-
Added a sentence to the section 'Other things you need to know': Waste derived finished goods still need to meet the end of waste test.
-
First published.